Foxslide FX3090 1000kg Loading Capacity Al-alloy Side Mounted Super Heavy Duty Telescopic Full Extension Ball Bearing Drawer Slides



Foxslide FX3090 1000kg Loading Capacity Al-alloy Side Mounted Super Heavy Duty Telescopic Full Extension Ball Bearing Drawer Slides 

●   Full extension

●  Sand and dust resistant

●  Designed with stops and baffles

●  Side-mounted

●  Even lengths  20"~80" [ 1”=25mm]

●  Wok temperature: -45°C~+65°C

●  Works well in medical shelters, military vehicles, on-board generators, special vehicles, rail transit, aviation, aerospace, drone shelters, etc.

More Details on Aluminium Heavy Duty Full Extension Ball Bearing Drawer Slides: 

Max Load Capacity 2200lb

FOXSLIDE heavy duty drawer slides are made of high-strength, high-density high-quality Aviation Aluminum. It can support heavy load storage without deformation,

and the bottom is equipped with a limited rubber pad, which is made of ABS plastic, with good wear resistance and impact resistance. After testing,

the number of opening and closing times has reached more than 200,000 times.

Full Extension Slide Rail, Double Anti-rust

The drawer can be fully pulled out for convenient storage of items. The slide railis made of Alumonium, which isolates the rail from direct contact with air and water,

and increases anti-oxidation and anti-corrosion. Easy to clean and wide range of utility.

Sand Preventing

The special design of the slide rail can make product prevent from sand and dust.

Notes on Slide Rails

1. In order to ensure the safety of users, the heavy-duty slide rails cannot be disassembled.

2. Due to different usage scenarios, this product does not contain screws. You can buy M6 screws yourself. 

3. The slide rail starts from 10 inches, and the weight is reduced by 10lb for every two inches of increase.

Installation Requirement 

Width: 3.54 inch( 90.0mm); 

Installation clearance: 90.0mm±0.3mm. Same clearance on both sides.  You can choose the size of the rail according to the depth of the drawer. 

The length of the slide should be ≦ The length of drawer. Please choose the right size before you purchase.

FAQ On Aluminium Heavy Duty Full Extension Ball Bearing Drawer Slides:

Q1: Can The Heavy Duty Drawer Slides Be Made With Our Logo Or Brand?

A1: Yes, OEM Is Welcome If The Quantity Reaches The MOQ. But The Authorization Of Logo Should Be Necessary.

Q2: How About Quality Control Of Your Factory?

A2: We Have An Inspection Team And We Pay Great Attention To Quality Control From The Beginning To The End Of The Mass Production,

By Testing The Goods With Our Own Cycling Test, Salt Spray Test, Hardness Test Machines. Meanwhile, 365 days of Quality Guarantee is provide.

Q3: How Do I Know The Products’ Quality And The Packing Ways Are We Required?

A3: Each Product Will Be Tested Before Delivery. We Will Send You Photos Of The Goods To Confirm Again The Packing Ways.

Q4: How do We Make The Payment?

A4: Cash Or T/T, 30% As Deposit 70% Paid Before Shipment. We Will Confirm This When We Conclude The Order.

Q5: How Long Is The Production Period?

A5: 25-30 Days After Received The Deposit. The Specific Delivery Time Depends On The Items And Quantity Of The Order.

Q6: Can We Have A Sample Drawer Slide For Test?

A6: Yes, Samples Drawer Slides Are Available For Test, Some are free, but delivery cost should be paid by yourself in following ways:

1) Offering us the courier account.

2) Arranging pick-up service.

3) Paying the freight to us by bank transfer.

Q7: What’s The Loading Capacity For One 20ft Container?

A7: Usually Loading Capacity Is 22-25 Tons, Exact Loading Capacity Depends On The Drawer Slide Model You Choose And The Country You Come From.

For More Information, Welcome To Contact Us.

Q8: What Should We Do If Quality Defects Occurred After Received The Goods?

A8: Please Kindly Send Us Photos With Detailed Description By Email, or Send Us Samples By Express. We Will Analyze The Reason And Solve It For You Immediately,

Refund Or Rework Will Be Arranged Once Verified.

Q9: Are you A Manufacturer or A Trading Company?

A9: We Are A Manufacturer And We Have Two Of Our Own Factories In Foshan, Guangdong, China to Produce Different Ball Bearing Drawer Slides Products.

Q10: Can You Make My Own Designed Products?

A10: Yes, We Can Make The products According To Your Detailed Drafts or Samples.

Q11: What Certificate Do you Have for The Heavy Duty Drawer Runners?

Foxslide Heavy Duty Drawer Slides are SGS certified, and Products are Manufactured under ISO9001 Standard.

Q12: Do You Have Distributors worldwide?

Yes, Foxslide Heavy Duty Drawer Slides are Well Popular in Europe, America, Africa and Asia Countries. We Have Distributors in Majority of Countries in Each Continent.

We Welcome New Partners of Foxslide Heavyy Duty Drawer Slides.